HIGH-HUMIDITY ENVIRONMENTS
Design
- Door components suitable for high-humidity environments
- Plastic barrier on bottom of door leaf, extending the entire width
Door hardware
- Use of hardware with suitable corrosion protection is recommended
- Visible hinge (VX system)
Door Closer
- Surface-mounted or integrated
Door Loops
- Surface-mounted, not integrated
Vision Panel
- Available when the door leaf (frieze rail) below the panel is 550 mm or greater
- Glazing beads preferably made from plastic or stainless steel
neuformtür-Door Model | RAL GZ 426/3 Model | Use | Sound insulation class |
---|---|---|---|
HT40 FR - 40mm | FR | T0 | SSK 0, 1, 2 |
HT50 FR - 50mm | FR | T0, RS, T30 | SSK 0, 1, 2, 3 |
HT65 FR - 65mm | FR | T0 | SSK 0, 1, 2, 3 |
HT70 FR - 70mm | FR | T0, RS, T30 | SSK 0, 1, 2, 3, 4, 5 |
WET ROOMS AND ENVIRONMENTS
Design
- Door components suitable for wet rooms and environments
- Plastic barrier on bottom of door leaf, extending the entire width
Door Hardware
- Use of hardware with suitable corrosion protection is recommended
- Visible hinge (VX system)
- Lock with stainless-steel face plate
Door Closer
- Surface-mounted or integrated
Door Loops
- Surface-mounted, not integrated
Vision Panel
- Available for KT40 door models
- Glazing beads made of plastic or stainless steel
Design | neuformtür-Door model | RAL GZ 426/3 Model | DIN EN 16580 Class | Use | Sound insulation class |
---|---|---|---|---|---|
Plastic materials only | KT40 - 40mm | NR | T0 | SSK 0 | |
Plastic materials only | KT50 - 50mm | NR | T0 | SSK 0 | |
Special construction | HT50 NR - 50mm | S | T0, RS, T30 | SSK 0, 1, 2, 3 |
PLANNING AIDS
RAL - GZ 426/3 High-humidity environments:
- Short-term effects of moisture on surface
- Effect of moisture through high humidity in air or direct water spray
- Additional quality assurance through RAL
RAL - GZ 426/3 Wet environments:
- Long-term effects of wet conditions and frequent water spray
- Additional quality assurance through an independent organisation
DIN EN 16580 High-humidity environments:
- Door leaves with prolonged exposure to humidity
DIN EN 16580 Wet-room door leaves:
- Door leaves used in areas with frequent exposure to cleaning agents or water spray
Comparisons of classes in accordance with RAL-GZ 426/3 and DIN EN 16580
Component | RAL - GZ 426/3 | RAL - GZ 426/3 Model | DIN EN 16580 | DIN EN 16580 Stress resitance class |
---|---|---|---|---|
Door leaf | High-humidity environment door | FR-T | High-humidity environment door | W |
Door leaf | Wet environment door | NR-T | Wet-room door | S |